Adding Capacity Memory / RAM With Flashdisk

Capacity of memory / RAM that can improve the performance of the computer itself. If you feel less the amount of memory / RAM is available, you can add them from the flashdisk device. How come? Virtual Memory, that is the answer. Adding memory capacity of RAM with a flashdisk is often referred to as Virtual Memory.

Virtual memory is an 'additional memory' to anticipate if there is data on the memory / main RAM is full.

Requirements that must be the motherboard and flash should already support USB 2.0, if it still uses USB 1 the results obtained less visible. Will get more leverage if you use the flash is already using the facility Ready Boost. Initially, Ready Boost is a facility for Windows Vista, but you can do as well on Windows XP (imitation Ready Boost)

The way is as follows:

• Attach the flashdisk to the computer
• Right click on My Computer and select Properties
• Click the Advanced tab, then click the Settings button in the Performance box
• In the window that appears, click the Advanced tab and click the Change button in the Virtual memory box
• Select the drive C, and then select the No paging file. If it proceed by clicking the Set button
• Select drive 'flashdisk' you (eg drive F), usually given the name of the Removable disk if you do not give a name on the flashdisk. Then select System managed size and proceed by clicking the Set button
• Note on the box Total paging file size for All drives. Recommended values do not exceed the capacity of its flashdisk
• If it is more then you can enter 'total value' of the capacity of the flashdisk. Way click Custom Size option and the Initial Size and Maximum Size charged with a total value of the capacity of the flashdisk. You have to leave 5 to 6 Mb. This is a requirement of Windows XP itself. If so, click the Set button
• Click OK and then restart the computer

With these tips you can maximize your computer performance by using flashdisk device you have.

source: cerdaskomputer.com